Valid NCS-Core Exam Dumps Ensure you a HIGH SCORE (2023)
Pass NCS-Core Exam with Latest Questions
NEW QUESTION # 112
An administrator is implementing a VDI solution. The workload will be a series of persistent desktops in a dedicated storage container withina four-node cluster. Storage optimizations should be set on the dedicated storage container to give optimal performance including during a node failure event.
Which storage optimizations should the administrator set to meet the requirements?
- A. Compression only
- B. Compression and Deduplication
- C. Deduplication and Erasure Coding
- D. Compression, Deduplication, and Erasure Coding
Answer: C
Explanation:
Explanation
Ref:
NEW QUESTION # 113
A consultant is planning an installation and needs to collect configuration items to be used during the install.
The data needed from the customer are IP addresses, Gateway, DNS servers, and NTP Servers.
Which Cluster Deployment document must be completed with the customer?
- A. Operations Guide
- B. Project Plan
- C. Technical Checklist
- D. Questionnaire
Answer: C
NEW QUESTION # 114
An administrator needs to replace the self-signed certificate on a cluster. Which two requirements must be met as part of the process? (Choose two.)
- A. The signed, intermediate and root certificates are chained.
- B. The cluster administrator must restart the interface gateway.
- C. The existing certificate must be deleted prior to replacement.
- D. The imported files for the customcertificate must be PEM encoded.
Answer: A,D
Explanation:
Explanation
Ref: https://portal.nutanix.com/page/documents/details?targetId=Prism-Central-Guide-Prism-v55:mul-security-ss
NEW QUESTION # 115
An organization subscribes to field advisories from the Nutanix support portal. An administrator receives an email about a rare problem that could cause cluster instability and affect the entire AOS cluster. The organization is running Vmware vsphere 6.x on Nutanix.
What action should be taken to resolve this issue?
- A. In Prism Central, select Life Cycle Management and perform LCM update.
- B. Open Prism Element and select Upgrade Software to update AOS.
- C. File a ticket to NutanixSupport and provide the Field Advisory ID.
- D. Use VMware Update Manager to update the cluster.
Answer: A
NEW QUESTION # 116
An administrator iscurrently using both 10g uplink with LACP and balance-tcp. A single VM should not be allowed to use more than a single 10G uplink, and both uplinks should be utilized.
Which two command should be used to configure the bond? (choose two)
- A. Ovs-vsctl set port br0-up bond_mode=balance-slb
- B. Ovs-vsctl set port br0-up bond_mode=balance-tcp
- C. Ovs-vsctl set port br0-up other_config: bond-rebalance-interval=30000
- D. Ovs-vsctl set port br0-up bond_mode=active-backup
Answer: A,C
NEW QUESTION # 117
A consultant is viewing an ESXi host via console without external network connectivity.
Which two IP addresses can be used to connect to the CVM (Choose two.)
- A. 192.168.5.1
- B. 192.168.5.2
- C. 192.168.5.254
- D. 192.168.5.253
Answer: B,C
NEW QUESTION # 118
Microsegmentation was recently enabled in a Nutanix environment. The administrator wants to leverage Prism Central to create a policy that will block all traffic, regardless of direction, between two groups of VMs identified by their category.
Which policy should be used to meet this requirement?
- A. AnIsolation Environment Policy
- B. An Application Security Policy
- C. A Whitehst-Based Policy
- D. A Quarantine Policy
Answer: A
Explanation:
NEW QUESTION # 119
An administrator is planning to deploy a Nutanix cluster to support a few high-performance VMs. This deployment will have the followingconsiderations:
* Individual VMs will likely generate network throughputs in the range of 90-100Mbps
* Due to the configuration of the VMs, it is unlikely that a node will host more than one or two of them at a time
* Individual VMs will communicatewith only a few (one or two) remote hosts at a time
* Multicast will not be used in the environment
* The hosts are connected via two 1GbE network connections
How should the administrator configure the network bonds to meet this requirement while maintaining the simplest switch configuration?
- A. Configure bond0 as balance-sib
- B. Configure bond0 as balance-lacp
- C. Configure bond0 as active-backup
- D. Configure bond0 as balance-tcp
Answer: A
Explanation:
Explanation
Ref:https://portal.nutanix.com/page/documents/solutions/details?targetId=BP-2071-AHV-Networking:top_ahv_n
NEW QUESTION # 120
An administrator needs to make sure an RF3 cluster can survive a failure of two complete racks without negatively affecting performance. The current cluster configuration consists of the following:
* 30 All Flash Nodes: distributed 10 nodes per rack across three 42U racks
* Each node is configured with 20TB usable storage all flash (Cluster Total 600TB Usable)
* Current cluster utilization is 500TB storage
* Storage containers have Erasure Coding enabled
Which configuration changes should be made to make sure the cluster meets the requirements?
- A. Expand the cluster to 50 nodes distributed evenly across 5 racks
- B. Expand the cluster to 60 nodes distributed evenly across 6 racks
- C. Expand the cluster to 40 nodes distributed evenly across 5 racks
- D. Expand the cluster to 48 nodes distributed evenly across 6 racks
Answer: B
Explanation:
Explanation
Ref:https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v5_17:arc-configure
NEW QUESTION # 121
An administrator receives an error indicating that the CVMs in the cluster are not syncing to any NTP servers.
An investigation of the issue finds:
* The NTP servers are configured in Prism
* The time on all CVMs is the same
* Both the CVMs and AHV hosts are configured for the UTC time zone
Which two steps can be taken to troubleshoot this issue? (Choose two.)
- A. Restart genesis on all CVMs.
- B. Restart the chronosservice on all CVMs.
- C. Confirm that the NTP servers are reachable from the CVMs.
- D. On a CVM. run the command a Hash ntpq -pn.
Answer: C,D
Explanation:
Explanation
Ref:https://portal.nutanix.com/page/documents/kbs/details?targetId=kA032000000bmjeCAA#Review_ntpq
NEW QUESTION # 122
A consultant creates three storage containers (container-1, container-2, container-3). The customer requires that only container-1, which will be utilized as an NFS datastore, be presented to external hosts.
However, users are able to mount all three containers.
What is causing this problem?
- A. A Global whitelist entry was configured.
- B. A Container-level whitelist entry was configured.
- C. Deduplication was turned on for all containers.
- D. Compression was turned on for all containers.
Answer: A
NEW QUESTION # 123
An administrator needs to replace an aging SAN and move to a hyper-converged infrastructure. The existing environment consists of the following hosts that are connected to the SAN:
* 5xAIX hosts
* 3x Hyper-V hosts
* 9xESXi hosts
* 2x physical SQL Clusters(Windows Server 2012R2 hosts)
After deploying a Nutanix AHV cluster, which two actions should the administrator take to meet the requirements? (Choose two.)
- A. Migrate the ESXi and Hyper-V workloads using Move.
- B. Deploy Files to support the AIX hosts.
- C. Deploy Volumes to support the AIX and SQL workloads.
- D. Migrate the ESXI workloads to AHVusing Move.
Answer: A,C
Explanation:
Explanation
Ref:https://portal.nutanix.com/#page/kbs/details?targetId=kA00e000000Cr7GCAS
NEW QUESTION # 124
Refer to the exhibit.
A Microsoft SQL 2016 deployment is shown in the exhibit. The administrator receives user reports that database queries take too long to return.
Which optimization should be made to this configuration to improve performance?
- A. Add a second SCSI controller for the Database.
- B. Configure the VM to use a PCI disk controller
- C. Combine both of the OS and SQL Binaries disks
- D. TempDB, andLogs disk Separate the Database. TempDB, and Logs onto their own disks
Answer: D
NEW QUESTION # 125
A consultant has deployed a new Nutanix AHV cluster with Foundation. The customer requests separating the management and production traffic in the CVM.
Which feature should the consultant configure?
- A. Micro-segmentation
- B. Multi-homing
- C. VLAN Tagging
- D. Network Segmentation
Answer: B
NEW QUESTION # 126
An administrator inherits a new Nutanix environment and logs in to a CVM to check the network configuration. The configuration is as follows:
Which action should the administrator take to improve network performance?
- A. Add eth0 and eth1 to the br0-up bond
- B. Configure balance-sib or balance-tcp mode for br0-up if switch configuration allows
- C. Configure VLAN tagging both on br0 and br1 and their physical interfaces.
- D. Remove one 10 Gbs interface from br0-up to make sure all 10 Gbs can be used.
Answer: B
NEW QUESTION # 127
After a recent installation using a flat switch, a consultant notices issues migrating the Nutanix nodes to the customer's network. The customer states that they are using VLANs on the production switch but not on the dedicated switch for IPMI. The customer does not require a manual configuration of the host and CVM.
What network changes need to be made to correct the issues?
- A. Use Native VLANs for the CVM and host and trunk mode for IPMI.
- B. Use Native VLANs for the CVM and host and access mode for IPMI.
- C. Use tagged VLANs for the CVM and host and access mode for IPMI.
- D. Us untagged VLANs for the CVM and host and trunk mode for IPMI.
Answer: B
NEW QUESTION # 128
An administrator of a Nutanix Enterprise Cloud has microsegmentation enabled and a firewall VM installed.
The security team notifies the administrator that one of the VMs hosted in the environment has been exhibiting suspect network activity. The administrator wants to isolate the VM from the production network, but must still be able to access it to perform diagnostics.
What should the administrator do to meet the requirement?
- A. Disable the vNIC on the affected VM
- B. Quarantine the VM using the Forensic Method
- C. Create a firewall rule that blocks VM traffic but permits diagnostic access
- D. Create asecurity policy with a service chain directing that VMs traffic to the firewall VM
Answer: B
Explanation:
Explanation
Refhttps://portal.nutanix.com/page/documents/kbs/details?targetId=kA00e000000LIelCAG
NEW QUESTION # 129
For a new AHV cluster installation, a customer has 20 NX-8155-G6 nodes with quad port SFP NICs.
The customer wants to meet the following guidelines:
* Take advantage of all available 10GbE links
* Achieve maximum throughput per VM
* Use of redundant ToR switches
* Fastest reconvergence during link failure
How should the load balancing be configured on the host?
- A. ovs-vsctl set port br0-up bond_mode=active-backup
ovs-vsctl set port br0-up other_config:bond-rebalance-interval=30000 - B. ovs-vsctl set port br0-up other_config:lacp-fallback-ab=true
ovs-vsctl set port br0-up lacp=active
ovs-vsctl set port br0-up bond_mode=balance-tcp - C. ovs-vsctl set port br0-up bond_mode=balance-slb
ovs-vsctl set port br0-up other_config:bond-rebalance-interval=30000
ovs-vsctl set port br0 tag=10 - D. ovs-vsctl set port br0-up bond_mode=balance-slb
Answer: C
NEW QUESTION # 130
An administrator is deploying Nutanix Files 3.5 and needs to configure the sizing of the FSVMs for an increased number of concurrent SMB connections over the default 750.
What should the administrator do?
- A. Complete the default installation change the CPU and RAM m Prism, and then log into the File Server dashboard and change the Filer Server Properties
- B. During installation, click Customize on the File Server Installation screen, change the number of connections, and finish the installation
- C. Deploy the Files VMs.power down the three FSVMs. change the CPU and RAM via Prism, and then power the three FSVMs back up
- D. During installation, input the correct number of connections in the File Server Installation screen and complete the installation
Answer: B
Explanation:
Explanation
Ref:https://portal.nutanix.com/page/documents/details?targetId=Files-v3_6:fil-file-server-manage-c.html
NEW QUESTION # 131
......
NCS-Core Exam Practice Questions prepared by Nutanix Professionals: https://testking.testpassed.com/NCS-Core-pass-rate.html