[Oct-2024] Cisco 500-490 Dumps – Reduce Your Chance of Failure in 500-490 Exam [Q20-Q40]

[Oct-2024] Cisco 500-490 Dumps – Reduce Your Chance of Failure in 500-490 Exam

To help you achieve your ultimate goal, we suggest the actual Cisco 500-490 dumps for your Designing Cisco Enterprise Networks exam preparation to use as your guideline.

NEW QUESTION # 20
Which two statements are true regarding Cisco ISE? (Choose two.)

A. ISE supports IPv6 downloadable ACLs.
B. The number of logs that ISE can retain is determined by your disk space.
C. ISE can detected endpoints whose addresses have been translated via NAT.
D. In distributed deployments, failover from primary to secondary Policy Administration Nodes happens automatically.
E. ISE supports up to 100 Policy Services Nodes.
F. In two-node standalone ISE deployments, failover must be done manually.

Answer: A,B

Explanation:
Cisco ISE is a security policy management platform that provides secure access to network resources. Cisco ISE functions as a policy decision point and enables enterprises to ensure compliance, enhance infrastructure security, and streamline service operations1. Two of the statements that are true regarding Cisco ISE are:
* ISE can detect endpoints whose addresses have been translated via NAT: Cisco ISE can discover,
* profile, and monitor the endpoint devices on the network, and classify them according to their associated policies and identity groups. Cisco ISE can leverage the pxGrid framework to share the contextual information with other security tools and platforms, and enhance the network visibility and security1. Cisco ISE can also detect endpoints whose addresses have been translated via NAT by using various methods, such as passive and active discovery, NMAP scanning, DHCP snooping, and RADIUS accounting234.
* The number of logs that ISE can retain is determined by your disk space: Cisco ISE provides a logging mechanism that is used for auditing, faultmanagement, and troubleshooting. The logging mechanism helps you to identify fault conditions in deployed services and troubleshoot issues efficiently. You can configure your Cisco ISE node to collect the logs in the local systems using a virtual loopback address5. The number of logs that ISE can retain is determined by your disk space, as well as the data purging settings that you can configure under Administration > System > Maintenance > Data Purging6. You can also configure Cisco ISE to send its logs to a remote system for greater retention history7.
The other statements are not true regarding Cisco ISE, because:
* In distributed deployments, failover from primary to secondary Policy Administration Nodes happens automatically: Cisco ISE supports high availability for the Administration persona, which provides centralized configuration and management of the distributed deployment. You can configure one primary Administration ISE node and one secondary Administration ISE node for high availability. However, the failover from primary to secondary Policy Administration Nodes does not happen automatically, unless you enable the automatic failover feature and configure a health check node to monitor the primary node's status8. Otherwise, you have to manually promote the secondary node to become the primary node in case of a failure9.
* In two-node standalone ISE deployments, failover must be done manually: Cisco ISE supports high availability for the Policy Service persona, which provides network access, posture, guest access, client provisioning, and profiling services. You can configure multiple Policy Service Nodes (PSNs) in a node group to provide session failover and load balancing for the endpoints. In a two-nodestandalone ISE deployment, where each node assumes all the personas, the failover for the Policy Service persona does not need to be done manually, as long as the network access devices are configured to use both nodes for RADIUS and TACACS services10.
* ISE supports IPv6 downloadable ACLs: Cisco ISE supports downloadable ACLs (DACLs), which are configured and implemented through authorization profiles. DACLs are used to enforce granular access control policies for the endpoints based on their identity and other attributes. However, Cisco ISE does not support IPv6 downloadable ACLs, as it only supports IPv4 ACLs for RADIUS and TACACS protocols1112.
References:
1: Cisco Content Hub - Cisco ISE Features 2: Cisco ISE Profiler Service Overview 3: ISE Deployment through NAT Boundaries - Cisco Community 4: Configure ISE 3.3 Native IPSec to Secure NAD (IOS-XE) Communication - Cisco 5: Logging [Cisco Identity Services Engine] - Cisco Systems 6: ISE maximum logging time / data retention - Cisco Community 7: Logs retention on ISE - Cisco Community 8: Cisco Identity Services Engine Administrator Guide, Release 2.4 9: Setting Up Cisco ISE in a Distributed Environment 10: Cisco Content Hub - Network Deployments in Cisco ISE 11: Cisco Identity Services Engine Administrator Guide, Release 2.2 12: Solved: ISE: support for IPv6 DACL's - Cisco Community
"There is no automatic failover for the Administration
persona."https://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_dis_deploy.html...Newer platforms and ISE versions appear to support ipv6 dacl just fine now

NEW QUESTION # 21
What should you do if you are looking at a strategic win with a customer and the customer wants to examine Cisco ISE for longer than a few weeks?

A. Give them our ISE YouTube videos.
B. Set them up with a dCloud account.
C. Point them to our dCloud demo library.
D. Give them some of our flash files that can be played on any browser.
E. Provide them with a downloadable POV kit.
F. Set them up with an account on a Cisco UCS server that hosts ISE.

Answer: E

Explanation:
Explanation
If you are looking at a strategic win with a customer and the customer wants to examine Cisco ISE for longer than a few weeks, you should provide them with a downloadable POV kit. A POV kit is a proof of value kit that contains a pre-configured virtual machine of Cisco ISE with licenses, sample data, and documentation. A POV kit allows the customer to quickly and easily deploy and test Cisco ISE in their own environment, without requiring any hardware or installation. A POV kit can help the customer to evaluate the features and benefits of Cisco ISE, such as identity-based access control, device profiling, posture assessment, guest management, and threat mitigation12.
The other options are not suitable for a customer who wants to examine Cisco ISE for longer than a few weeks. Pointing them to our dCloud demo library, giving them our ISE YouTube videos, or giving them some of our flash files that can be played on any browser are good ways to introduce Cisco ISE to the customer, but they do not provide a hands-on experience or a realistic scenario of how Cisco ISE works in their network.
Setting them up with a dCloud account or an account on a Cisco UCS server that hosts ISE are also possible ways to provide a demo or a trial of Cisco ISE, but they may have limitations on the duration, availability, scalability, or customization of the environment. A POV kit gives the customer more flexibility and control over their evaluation of Cisco ISE.
References :=
Solved: ISE PoV licenses - Cisco Community
Cisco Endpoint Security Analytics (CESA) Built on Splunk Quickstart POV Kit & Deployment Guide - Cisco Community

NEW QUESTION # 22
Which two statements are true regarding SD-WAN demonstrations? (Choose two.)

A. During a demo, you should consider the target audience and the desired outcome.
B. During a demo, you should demonstrate and discuss what the team considers important details.
C. As a Cisco SD-WAN SE, you should you should spend your time learning about the technology rather than contributing to demo innovation.
D. Use demonstrations primarily for large opportunities and competitive situations.
E. There is a big difference between demos that use a top down approach and demos that use a bottom up approach.

Answer: A,E

Explanation:
Explanation
SD-WAN demonstrations are an effective way to showcase the benefits and features of Cisco SD-WAN solutions to potential customers. However, not all demos are created equal, and there are some best practices to follow to ensure a successful and engaging demo. Here are some explanations for why C and E are true statements regarding SD-WAN demonstrations:
C: During a demo, you should consider the target audience and the desired outcome. This is a true statement because different audiences may have different levels of technical knowledge, business needs, and expectations from the demo. For example, a demo for a C-level executive may focus more on the business outcomes and value proposition of SD-WAN, while a demo for a network engineer may dive deeper into the technical details and configuration options. Therefore, it is important to tailor the demo to the specific audience and the desired outcome, such as generating interest, building trust, or closing a deal.
E: There is a big difference between demos that use a top down approach and demos that use a bottom up approach. This is also a true statement because the two approaches have different advantages and disadvantages, and may suit different scenarios. A top down approach starts with the high-level overview of the SD-WAN solution, such as the architecture, components, benefits, and use cases, and then drills down into the specific features and functionalities. A bottom up approach starts with the low-level details of the SD-WAN solution, such as the configuration, troubleshooting, and testing, and then builds up to the big picture and value proposition. A top down approach may be more suitable for a non-technical or business-oriented audience, while a bottom up approach may be more suitable for a technical or hands-on audience.
References :=
Cisco SD-WAN Demonstration Guide
SD-WAN Best Practices | Kentik Blog
SD-WAN best practices for a successful implementation
SD-WAN best practices - VMware Blogs

NEW QUESTION # 23
Which is a function of the Proactive Insights feature of Cisco DNA Center Assurance?

A. enabling you to quickly view all of the contextual information related to a single user
B. generating synthetic traffic to perform tests that raise awareness of potential network issues
C. enabling you to see the complete path of packets from the client to the end application
D. pointing out where the most serious issues are happening in the network

Answer: B

NEW QUESTION # 24
Which Cisco product supports SD-Access and specifically built to address new challenges faced by enterprises?

A. Catalyst 9500
B. Nexus 7700 w/ Sup2E and M3 line cards
C. ASR 1000-HX
D. ISR 4221
E. Catalyst 6807-XL w/ Sup6T and C6800 10G line cards
F. CSRv virtual router

Answer: A

Explanation:
The Cisco Catalyst 9500 Series Switches are specifically built to address the new challenges faced by enterprises, such as the need for increased bandwidth, security, and scalability. The Catalyst 9500 Series Switches are also designed to support Cisco SD-Access, which is a software-defined access fabric that simplifies network management and improves network security.
References: =
* Designing Cisco Enterprise Networks
(ENDESIGN): https://www.cisco.com/c/en/us/training-events/training-certifications/training/training-serv
* Cisco Catalyst 9500 Series
Switches: https://www.cisco.com/site/us/en/products/networking/switches/catalyst-9500-series-switches/in The Catalyst 9K platform has been built to address security risks posed by advanced persistent threats, operational complexities associated with IoT convergence, evolving mobility requirements and a need to take advantage of Cloud agility & consumption models.https://www.orbe.es/wp-content/uploads/2017/11/DNA_Bootcamp_SDA_CustomerLEO_Orbe.compress Slide 63

NEW QUESTION # 25
Which protocol runs between the vSmart controllers and between the vSmart controllers and the vEdge routers, and unifies all control plane functions under a single protocol umbrella?

A. VRRP
B. OSPF
C. IKE
D. BGP
E. OMP

Answer: E

Explanation:
Explanation
The protocol that runs between the vSmart controllers and between the vSmart controllers and the vEdge routers, and unifies all control plane functions under a single protocol umbrella is the Overlay Management Protocol (OMP)12. OMP is a proprietary protocol that is designed to enable the Cisco SD-WAN solution, which provides a software overlay that runs over standard network transport, including MPLS, broadband, and internet to deliver applications and services3. OMP provides the following services12:
Orchestration of overlay network communication, including connectivity among network sites, service chaining, and VPN or VRF topologies Distribution of service-level routing information and related location mappings Distribution of data plane security parameters Central control and distribution of routing policy OMP is an all-encompassing information management and distribution protocol that enables the overlay network by separating services from transport. Services provided in a typical VPN setting are usually located within a VPN domain, and they are protected so that they are not visible outside the VPN. In such a traditional architecture, it is a challenge to extend VPN domains and service connectivity. OMP addresses these scalability challenges by providing an efficient way to manage service traffic based on the location of logical transport end points. This method extends the data plane and control plane separation concept from within routers to across the network2.
References:
1: Routing Configuration Guide for vEdge Routers, Cisco SD-WAN Release 20.x - Unicast Overlay Routing 2: Introduction to Overlay Management Protocol in Viptela 3: Cisco SD-WAN vEdge vManage vSmart IBM

NEW QUESTION # 26
Which two statements describes Cisco SD-Access? (Choose Two.)

A. an overlay for the wired infrastructure in which traffic is tunneled via a GRF tunnel lo a mobility controller for policy and application visibility.
B. a collection of tools and applications that are a combination of loose and tight coupling
C. an automated encryption/decryption engine for highly secured transport requirements
D. programmable overlays enabling network virtualization across the campus
E. software-defined segmentation and policy enforcement based on user identity and group membership

Answer: D,E

NEW QUESTION # 27
Which two options are primary functions of Cisco ISE? (Choose two.)

A. providing information about every device that touches the network
B. automatically enabling, disabling, or reducing allocated power to certain devices
C. allocating resources
D. enforcing endpoint compliance with network security policies
E. enabling WAN deployment over any type of connection
F. providing VPN access for any type of device

Answer: A,D

Explanation:
Explanation/Reference:

NEW QUESTION # 28
Which three options focus of the current digital business era? (Choose three.)

A. IoT scale
B. centralized enterprise and web applications
C. automation
D. Human scale
E. connectivity
F. virtualized services

Answer: A,C,F

NEW QUESTION # 29
Which two statements are true regarding SD-WAN demonstrations? (Choose two.)

A. During a demo, you should consider the target audience and the desired outcome.
B. During a demo, you should demonstrate and discuss what the team considers important details.
C. As a Cisco SD-WAN SE, you should you should spend your time learning about the technology rather than contributing to demo innovation.
D. Use demonstrations primarily for large opportunities and competitive situations.
E. There is a big difference between demos that use a top down approach and demos that use a bottom up approach.

Answer: A,E

Explanation:
SD-WAN demonstrations are an effective way to showcase the benefits and features of Cisco SD-WAN solutions to potential customers. However, not all demos are created equal, and there are some best practices to follow to ensure a successful and engaging demo. Here are some explanations for why C and E are true statements regarding SD-WAN demonstrations:
* C. During a demo, you should consider the target audience and the desired outcome. This is a true statement because different audiences may have different levels of technical knowledge, business needs, and expectations from the demo. For example, a demo for a C-level executive may focus more on the business outcomes and value proposition of SD-WAN, while a demo for a network engineer may dive deeper into the technical details and configuration options. Therefore, it is important to tailor the demo to the specific audience and the desired outcome, such as generating interest, building trust, or closing a deal.
* E. There is a big difference between demos that use a top down approach and demos that use a bottom up approach. This is also a true statement because the two approaches have different advantages and disadvantages, and may suit different scenarios. A top down approach starts with the high-level overview of the SD-WAN solution, such as the architecture, components, benefits, and use cases, and then drills down into the specific features and functionalities. A bottom up approach starts withthe low-level details of the SD-WAN solution, such as the configuration, troubleshooting, and testing, and then builds up to the big picture and value proposition. A top down approach may be more suitable for a non-technical or business-oriented audience, while a bottom up approach may be more suitable for a technical or hands-on audience.
References :=
* Cisco SD-WAN Demonstration Guide
* SD-WAN Best Practices | Kentik Blog
* SD-WAN best practices for a successful implementation
* SD-WAN best practices - VMware Blogs
Stay focused and develop a custom story guide taking into consideration the target audience, desired outcome and story to tell while demonstrating the Viptela solution capabilities Slide 151 = There is a big difference demoing using a top down vs. bottom up approachhttps://salesconnect.cisco.com/sc/s/learning-activity-from-plan?ltui__urlRecordId=a0c8c00000P3hKMA

NEW QUESTION # 30
Which Cisco vEdge router offers 20 Gb of encrypted throughput?

A. Cisco vEdge 100
B. Cisco vEdge 2000
C. Cisco vEdge 5000
D. Cisco vEdge 1000

Answer: C

Explanation:
According to the Cisco SD-WAN vEdge Routers Data Sheet1, the Cisco vEdge 5000 router is the only model that offers 20 Gbps of encrypted throughput. The vEdge 5000 router delivers highly secure site-to-site data connectivity to large enterprises, offers interface modularity, and supports up to 4 Network Interface Modules (NIMs)2. The other models of vEdge routers have lower encrypted throughput capacities, as shown in Table 6 of the Ordering Guide for SD-WAN3. The vEdge 1000 router has a maximum encrypted throughput of 1 Gbps, the vEdge 2000 router has a maximum encrypted throughput of 5 Gbps, and the vEdge 100 router has a maximum encrypted throughput of 100 Mbps3.
References:
1: Cisco SD-WAN vEdge Routers Data Sheet 2: vEdge 5000 Router 3: Ordering Guide for SD-WAN
1. vEdge-100: 100Mbps AES-256 throughput, with five fixed 10/100/1000 Mbps ports. Comes in three different flavors: vEdge 100b: Ethernet only vEdge 100m: Ethernet and integrated 2G/3G/4G modem vEdge
100wm: Ethernet and integrated 2G/3G/4G modem + Wireless LAN 2. vEdge-1000: 1 Gbps AES-256 throughput, with 8 ports of fixed GE SFP 3. vEdge-2000: 10 Gbps AES-256 throughput, with 2 Pluggable Interface Modules 4. vEdge-5000: 20 Gbps AES-256 throughput, with 4 Network Interface Modules

NEW QUESTION # 31
Which two options help you sell Cisco ISE? (Choose two.)

A. Showcasing the entire ISE feature set
B. Discussing the importance of custom profiling
C. Downplaying the value of pxGrid as compared to RESTful APIs
D. Referring to TrustSec as being only supported on Cisco networks
E. Explaining ISE support for 3rd party network devices

Answer: A,E

NEW QUESTION # 32
Which is a benefit of a cloud-based SD-WAN deployment?

A. instant scale
B. controller availability never an issue
C. agility of change dependent only on your own internal IT processes
D. might be required for compliance with industry standards
E. security never a n issue

Answer: A

Explanation:
A cloud-based SD-WAN deployment is a model of delivering SD-WAN services from the cloud, rather than from on-premises hardware or software appliances. A cloud-based SD-WAN deployment has several benefits, such as:
* Instant scale: A cloud-based SD-WAN deployment can scale up or down the network resources and bandwidth on demand, without requiring additional hardware or manual configuration. This enables the network to adapt to the changing traffic patterns and user demands, while optimizing the network performance and efficiency12.
* Reduced costs: A cloud-based SD-WAN deployment can lower the capital and operational expenses of the network, by eliminating the need for expensive and complex WAN infrastructure, such as MPLS circuits, routers, firewalls, and WAN optimization devices. A cloud-based SD-WAN deployment can also leverage the economies of scale and the pay-as-you-go model of the cloud, which can reduce the network costs per megabit12.
* Simplified management: A cloud-based SD-WAN deployment can simplify the network management and operation, by providing a centralized and unified dashboard that can monitor, configure, and troubleshoot the network across multiple sites and regions. A cloud-based SD-WAN deployment can alsoautomate the network provisioning, orchestration, and optimization, by applying intelligent policies and analytics based on the business intent and network conditions12.
* Enhanced security: A cloud-based SD-WAN deployment can enhance the network security and compliance, by providing built-in and integrated security features, such as encryption, firewall, VPN, IPS, and antivirus. A cloud-based SD-WAN deployment can also leverage the cloud security services, such as SASE, toprovide secure and direct access to the cloud applications and platforms, without compromising the network performance and user experience123.
* Improved cloud readiness: A cloud-based SD-WAN deployment can improve the cloud readiness and
* agility of the network, by enabling seamless and optimized connectivity to the public cloud, SaaS, and cloud interconnect providers. A cloud-based SD-WAN deployment can also support the multicloud and hybrid-cloud strategies, by allowing the network to operate as a cloud-native WAN overlay, using software-defined automation and orchestration tools123.
References:
* What Is SD-WAN? - Software-Defined WAN (SDWAN) - Cisco
* SD-WAN Benefits: 5 Business Advantages of SD-WAN - Fortinet
* What are the Benefits of SD-WAN? - Cisco
* What are the Benefits of SD-WAN?
* SD-WAN and SASE: The new landscape of networking
https://salesconnect.cisco.com/sc/s/learning-activity-from-plan?ltui__urlRecordId=a0c8c00000P3hKMAAZ&ltu

NEW QUESTION # 33
Which two statements are true regarding Cisco ISE? (Choose two.)

A. The number of logs that ISE can retain is determined by your disk space.
B. In distributed deployments, failover from primary to secondary Policy Administration Nodes happens automatically.
C. ISE supports up to 100 Policy Services Nodes.
D. ISE can detected endpoints whose addresses have been translated via NAT.
E. In two-node standalone ISE deployments, failover must be done manually.
F. ISE supports IPv6 downloadable ACLs.

Answer: A,D

Explanation:
Explanation
Cisco ISE is a security policy management platform that provides secure access to network resources. Cisco ISE functions as a policy decision point and enables enterprises to ensure compliance, enhance infrastructure security, and streamline service operations1. Two of the statements that are true regarding Cisco ISE are:
ISE can detect endpoints whose addresses have been translated via NAT: Cisco ISE can discover, profile, and monitor the endpoint devices on the network, and classify them according to their associated policies and identity groups. Cisco ISE can leverage the pxGrid framework to share the contextual information with other security tools and platforms, and enhance the network visibility and security1. Cisco ISE can also detect endpoints whose addresses have been translated via NAT by using various methods, such as passive and active discovery, NMAP scanning, DHCP snooping, and RADIUS accounting234.
The number of logs that ISE can retain is determined by your disk space: Cisco ISE provides a logging mechanism that is used for auditing, fault management, and troubleshooting. The logging mechanism helps you to identify fault conditions in deployed services and troubleshoot issues efficiently. You can configure your Cisco ISE node to collect the logs in the local systems using a virtual loopback address5. The number of logs that ISE can retain is determined by your disk space, as well as the data purging settings that you can configure under Administration > System > Maintenance > Data Purging6. You can also configure Cisco ISE to send its logs to a remote system for greater retention history7.
The other statements are not true regarding Cisco ISE, because:
In distributed deployments, failover from primary to secondary Policy Administration Nodes happens automatically: Cisco ISE supports high availability for the Administration persona, which provides centralized configuration and management of the distributed deployment. You can configure one primary Administration ISE node and one secondary Administration ISE node for high availability. However, the failover from primary to secondary Policy Administration Nodes does not happen automatically, unless you enable the automatic failover feature and configure a health check node to monitor the primary node's status8. Otherwise, you have to manually promote the secondary node to become the primary node in case of a failure9.
In two-node standalone ISE deployments, failover must be done manually: Cisco ISE supports high availability for the Policy Service persona, which provides network access, posture, guest access, client provisioning, and profiling services. You can configure multiple Policy Service Nodes (PSNs) in a node group to provide session failover and load balancing for the endpoints. In a two-node standalone ISE deployment, where each node assumes all the personas, the failover for the Policy Service persona does not need to be done manually, as long as the network access devices are configured to use both nodes for RADIUS and TACACS services10.
ISE supports IPv6 downloadable ACLs: Cisco ISE supports downloadable ACLs (DACLs), which are configured and implemented through authorization profiles. DACLs are used to enforce granular access control policies for the endpoints based on their identity and other attributes. However, Cisco ISE does not support IPv6 downloadable ACLs, as it only supports IPv4 ACLs for RADIUS and TACACS protocols1112.
References:
1: Cisco Content Hub - Cisco ISE Features 2: Cisco ISE Profiler Service Overview 3: ISE Deployment through NAT Boundaries - Cisco Community 4: Configure ISE 3.3 Native IPSec to Secure NAD (IOS-XE) Communication - Cisco 5: Logging [Cisco Identity Services Engine] - Cisco Systems 6: ISE maximum logging time / data retention - Cisco Community 7: Logs retention on ISE - Cisco Community 8: Cisco Identity Services Engine Administrator Guide, Release 2.4 9: Setting Up Cisco ISE in a Distributed Environment 10: Cisco Content Hub - Network Deployments in Cisco ISE 11: Cisco Identity Services Engine Administrator Guide, Release 2.2 12: Solved: ISE: support for IPv6 DACL's - Cisco Community

NEW QUESTION # 34
Which protocol runs between the vSmart controllers and between the vSmart controllers and the vEdge routers, and unifies all control plane functions under a single: protocol umbrella1?

A. OSPF
B. IKE
C. VRRP
D. BGP

Answer: C

NEW QUESTION # 35
Which three key differentiators that DNA Assurance provides that our competitors are unable match?
(Choose three.)

A. On-premise and cloud-base analytics
B. Support for Overlay Virtual Transport
C. VXLAN support
D. Proactive approach to guided remediation
E. Apple Insights
F. Network time travel

Answer: A,D,F

NEW QUESTION # 36
Which two options are primary functions of Cisco ISE? (Choose two.)

A. providing information about every device that touches the network
B. automatically enabling, disabling, or reducing allocated power to certain devices
C. allocating resources
D. enforcing endpoint compliance with network security policies
E. enabling WAN deployment over any type of connection
F. providing VPN access for any type of device

Answer: A,D

NEW QUESTION # 37
Which Cisco product were incorporated into Cisco ISE between ISE releases 2.0 and 2.3?

A. Cisco ESA
B. Cisco WSA
C. Cisco ACS
D. Cisco ASA

Answer: C

Explanation:
Cisco ISE incorporated Cisco ACS (Cisco Secure Access Control System) between ISE releases 2.0 and 2.3.
Cisco ACS was a network access policy platform that provided authentication, authorization, and accounting (AAA) services for network devices and users. Cisco ACS was discontinued in 2017 and replaced by Cisco ISE, which offers more advanced features and capabilities for identity-based network access control. Cisco ISE provides a migration tool that allows customers to migrate their data and configurations from Cisco ACS to Cisco ISE. The migration tool supports Cisco ACS versions 5.5, 5.6, 5.7, and 5.8 and Cisco ISE versions
2.0, 2.1, 2.2, and 2.3.
References:
* Cisco Secure Access Control System End-of-Life Announcement [Cisco Secure Access Control System]
* Cisco Secure ACS to Cisco ISE Migration Tool [Cisco Identity Services Engine]
* Cisco Identity Services Engine Administrator Guide, Release 2.3 - Cisco Secure ACS to Cisco ISE Migration [Cisco Identity Services Engine]
* Cisco Identity Services Engine Administrator Guide, Release 2.3 - Manage Migration [Cisco Identity Services Engine]
* [Cisco Identity Services Engine Migration Guide, Release 2.3 [Cisco Identity Services Engine]]
* [Designing Cisco Enterprise Networks (ENDESIGN) Exam Topics [Cisco]]
* [Cisco Validated Design Guides [Cisco]]
ISE 2.3 includes the final suite of capabilities designed to reach feature parity with Cisco Secure Access Control System (ACS), allowing all existing ACS customers to migrate their deployment to ISE. New features include TACACS+-based device administration for IPv6, import and export capabilities for TACACS+-based command sets, policy export scheduling, IP range support in all octets, and more. See the ACS vs ISE Comparison for feature comparisons with every release of ISE

NEW QUESTION # 38
Which option will help build your customers platform during the discovery phase?

A. business case
B. detailed design
C. POV report
D. PO
E. high-level design

Answer: A

Explanation:
= A business case is an option that will help build your customers platform during the discovery phase. A business case is a document that outlines the rationale, objectives, benefits, costs, risks, and alternatives of a proposed project or solution. A business case helps to justify the investment and align the stakeholders on the value proposition of the project or solution12.
During the discovery phase, the goal is to understand the problem that needs to be solved, the user needs and context, the constraints and opportunities, and the underlying policy intent. A business case can help to achieve this goal by providing a clear and concise summary of the problem statement, the desired outcomes, the potential solutions, and the evaluation criteria34. A business case can also help to communicate the vision and scope of the project or solution to the customers and other stakeholders, and to secure their buy-in and support56.
A business case is not the same as a POV report, a detailed design, a high-level design, or a PO. A POV report is a document that summarizes the findings and recommendations from a proof of value (POV) exercise, which is a short-term trial of a solution to demonstrate its feasibility and benefits7. A detailed design is a document that specifies the technical and functional requirements, architecture, and configuration of a solution8. A high-level design is a document that provides an overview of the solution, such as the main components, interfaces, and interactions9. A PO is a purchase order, which is a document that authorizes a purchase transaction between a buyer and a seller.
References :=
* What is a business case? Definition and examples
* Business Case - Project Management Knowledge
* How the discovery phase works - Service Manual - GOV.UK
* Discovery Phase - Service Design - The Beginner's Guide
* How to Write a Business Case 4 Steps to a Perfect Business Case Template
* How to Write a Business Case: 4 Steps to a Perfect Business Case Template
* What is a Proof of Value (POV)?
* What is a Detailed Design Document (DDD)?
* What is a High-Level Design Document?
* [What is a Purchase Order (PO)?]

NEW QUESTION # 39
What is the easiest way to enable SD-Access for all your remote site after you have your campus SD-Access fabric up and running?

A. Use a separate fabric domain for each site and use SD-WAN as the underlay
B. Treat all the sites as one fabric domain and use SD-WAN as the underlay
C. Treat all the sites as one fabric domain and use the traditional physical network as the underlay
D. Use a separate fabric domain for each site and use the traditional physical network as the underlay

Answer: C

NEW QUESTION # 40
......

Accurate & Verified Answers As Seen in the Real Exam here: https://testking.testpassed.com/500-490-pass-rate.html

[Oct-2024] Cisco 500-490 Dumps – Reduce Your Chance of Failure in 500-490 Exam [Q20-Q40]

Related Articles

Latest Test Passed

Useful Links

Contact Us