Free Sales Ending Soon - 100% Valid 350-601 Exam Dumps with 587 Questions
Verified 350-601 dumps Q&As on your CCNP Data Center Exam Questions Certain Success!
The first step to prepare for the Cisco 350-601 exam is to review the topics covered in it. This will help evaluate the scope of work and select the right study materials. The highlights of the knowledge areas that constitute the content of the certification test are provided below:
- Storage Network – 20%
The focus of this domain is on the ability of the students to perform the following technical tasks: implementation of Fibre Channel (comprising switch fabric initialization, NPV & NPIV, port channels, CFS, FCID, zoning, device alias, FCNS, and VSAN); implementation of FCoE Unified Fabric (comprising FIP & DCB); description of NFS as well as NAS concepts; description of software updates and their effects (comprising disruptive/nondisruptive & EPLD); implementation of infrastructure monitoring.
- Compute – 25%
The aim of this exam section is to assess the competency of the professionals in implementing Cisco Unified Compute System Rack Servers. It also encompasses their expertise in implementing Cisco Unified Compute System Blade Chassis, comprising network management, primary setup, storage management, infrastructure management, as well as server management. Other abilities measured within this subject area include describing HyperFlex Infrastructure Concepts as well as their benefits; explaining software & firmware updates as well as their influence on B-Series & C-Series servers; implementing the management of compute configuration; implementing infrastructure monitoring such as SPAN and Intersight.
- Network – 25%
To answer the questions related to this topic, the candidates need to show their proficiency in implementing routing protocols (OSPFv2, MP-BGP, OSPFv3, PIM, and FHRP); implementing switching protocols, such as LACP, RSTP+, and Vpc; implementing overlay protocols, including VXLAN EVPN and OTV; implementing the ACI concepts, such as fabric setup, VMM, access policies, and tenant policies. Besides that, the applicants are required to show that they possess the skills in analyzing packet flow (comprising multicast, unicast, and broadcast); analyzing Cloud service as well as deployment models (NIST 800-145); describing software updates as well as their impacts (comprising disruptive/nondisruptive, EPLD, and patches); implementing the management of network configuration; implementing infrastructure monitoring such as NetFlow as well as SPAN; describing the concepts of network assurance like streaming telemetry.
- Security – 15%
The last part of the Cisco 350-601 exam comprises of the application of network security (AAA & RBAC, DHCP snooping, ACI contracts & microsegmentation, CoPP, first-hop security features like dynamic ARP inspection, and port security); application of compute security (AAA & RBAC as well as keychain authentication); application of storage security (AAA & RBAC, port security, and fabric binding).
- Automation – 15%
This module requires that the examinees possess the skills in implementing automation & scripting tools, such as EEM, scheduler, REST API, Bash Shell & Guest Shell for NX-OS, JSON & XML encodings. They should also be able to assess the automation & orchestration technologies, such as Ansible, UCSD, Puppet, POAP, Python, DCNM, and PowerShell.
NEW QUESTION # 315
An engineer is configuring a backup operation on the existing Cisco UCS environment using a logical configuration. Which configuration is expected to be saved by using this backup type?
- A. roles
- B. systems
- C. servers
- D. service profiles
Answer: D
Explanation:
https://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/141/ UCSM_GUI_Configuration_Guide_141_chapter43.html
NEW QUESTION # 316
Which product includes prebuilt templates that can be used to customize fabric deployments?
- A. Cisco Tetration
- B. Cisco ACI
- C. Cisco UCS Manger
- D. Cisco data Center Network Manger
Answer: D
Explanation:
https://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/prime-data-center-networkmanager/datasheet-c78-740978.html
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/11_2_1/config_guide/lanfabric/ b_dcnm_fabric_lan/template_usage.html
NEW QUESTION # 317
You are about to assign a static UUID to a service profile. This particular UUID is also defined within the range of a UUID pool. The duplicate UUID in the pool has not yet been allocated. What will be the result of applying the static UUID?
- A. Applying the static UUID will fail with an error stating that the UUID exists within a defined resource pool.
- B. Applying the static UUID will succeed with no warnings.
- C. Applying the static UUID will succeed and an information fault will be raised.
- D. Applying the static UUID will succeed and a minor fault will be raised.
- E. Applying the static UUID will fail with an error stating that the UUID is a duplicate UUID.
Answer: B
Explanation:
UUID suffix pool is a collection of SMBIOS UUIDs that are available to be assigned to servers.
The first number of digits that constitute the prefix of the UUID are fixed. The remaining digits, the UUID suffix, are variable. A UUID suffix pool ensures that these variable values are unique for each server associated with a service profile which uses that particular pool to avoid conflicts.
If you use UUID suffix pools in service profiles, you do not have to manually configure the UUID of the server associated with the service profile.
Reference: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-
0/b_UCSM_GUI_Configuration_Guide_2_0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_0
1.html
NEW QUESTION # 318
An engineer must configure a control plane policy on a Cisco Nexus 9000 Series Switch that is located at IP 192.168 20.1 that moots those requirements Only HTTP. RDP. and ICMP traffic is permitted from subnet 192.168.10.0/24.
The committed information rate must be 54000 pps.
The burst size must be 128 packets.
Any other traffic must be dropped.
Drag and drop the code snippets from the bottom onto the blanks in the code on the top to complete the configuration. Not all code snippets are used
Answer:
Explanation:
NEW QUESTION # 319
An engineer needs to monitor ingress traffic that arrives at interface Ethernet 1/3 that belongs to a Cisco Nexus
5600 Series Switch. The traffic analyzer machine located at interface Ethernet 1/5 is already monitoring other production, and the traffic analyzer must not be impacted by the traffic captured from the interface Eth1/3. The operations team allocated a traffic budget for the new monitoring session of 1 Gbps to meet this requirement Which set of commands configures the SPAN session?
- A. Option D
- B. Option C
- C. Option A
- D. Option B
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5600/sw/system_management/7x/ b_5600_System_Mgmt_Config_7x/configuring_span.html
NEW QUESTION # 320
AN engineer is asked to modify an overridden policy by changing the number of FCNS database entries to
1500 and then generable a massage. What configuration will accomplish this task?
A)
B)
C)
D)
- A. Option A
- B. Option D
- C. Option C
- D. Option B
Answer: D
NEW QUESTION # 321
An engineer must create a scheduler configuration to create two backup jobs per day.
The backup file must be copied to a server in the operations VRF.
Which configuration accomplishes this task?
- A.
- B.
- C.
- D.
Answer: B
NEW QUESTION # 322
A storage engineer must configure zoning on a Cisco MDS 9000 Series switch. Drag and drop actions from the left into the order on right
Answer:
Explanation:
Explanation
A, B, F, D, C, E
NEW QUESTION # 323
Which statement describes the rolling EPLD upgrade on a Cisco MDS 9000 Series Switch?
- A. Only the modules that are being upgraded are disrupted.
- B. The standby supervisor module is capable of performing the upgrade.
- C. An EPLD upgrade is nondisruptive.
- D. All modules on the switch are disrupted.
Answer: A
Explanation:
Section: Compute
NEW QUESTION # 324
Refer to the exhibit.
What is the outcome of this command when the EPLD is updated on a Cisco Nexus 9000 Series Switch?
- A. displays the impact of the upgrade on the operation of the switch
- B. displays the compatibility of the EPLD upgrade and the image in the bootflash
- C. upgrades the EPLD on the switch disruptively
- D. shows a simulated upgrade of the EPLD
Answer: B
NEW QUESTION # 325
An engineer must allow communication between the APIC controller and an OpenStack OpFlex agent. The agent is running on a compute node directly plugged to a Cisco ACI leaf switch. The engineer must enable and extend Infra VLAN on the port facing the compute and extend the Infra VLAN to the host. Which action must be taken to meet these requirements?
- A. Enable the Infra VLAN on the Attachable Access Entity Profile.
- B. Add the infra VLAN via the VMM domain.
- C. Add the infra VLAN via the physical domain.
- D. Enable the Infra VLAN on the Interface Profile policy
Answer: C
NEW QUESTION # 326
Which two statements describe the process of upgrading an EPLD on a Cisco MUS 9000 Series Switch? (Choose two)
- A. An upgrade verification identifies the impact of each EPLD upgrade
- B. EPLD upgrades are capable to be completed without powering down the module during the upgrade
- C. The CPLDs for all the modules on a switch must be upgraded at the same time
- D. EPLDs are only capable to be upgraded to the latest FH. D image
- E. EPLDs are capable to be upgraded without replacing the hardware
Answer: A,E
NEW QUESTION # 327 
Refer to the exhibit. An engineer must configure FCoE on a Cisco Nexus switch. Which two command sets complete this configuration? (Choose two.)
- A. vsan database
vsan 10 interface ethernet 1/3 - B. vsan database
vsan 10 interface vfc 10 - C. interface vfc 10
bind interface fcoe-vfc 1/3
no shut - D. interface vfc 10
bind interface ethernet 1/3
no shut - E. interface fcoe 10
bind interface ethernet 1/3
no shut
Answer: B,D
Explanation:
Section: Storage Network
NEW QUESTION # 328
An engineer must deploy a Cisco UCS C-Series Server with a single VIC 1455 integrated into a Cisco UCS Manager cluster. Two fiber connections are available, and the deployment has no fabric extenders. Which set of actions accomplishes this goal?
- A. Reset the system using Cisco IMC to its factory default settings.
Insert 1000Base-T RJ45 SFP in VIC port 1 and 3. - B. Configure VIC attached ports as Uplink ports on fabric interconnects.
Attach VIC port 1 and 3 to Fabric Interconnects. - C. Reset the system using Cisco IMC to its factory default settings.
Attach VIC port 1 and 3 to Fabric Interconnects. - D. Configure VIC attached ports as Uplink ports on fabric interconnects.
Insert 1000Base-T RJ45 SFP in VIC port 1 and 3.
Answer: B
NEW QUESTION # 329
Refer to the exhibit.
An engineer configures a new application profile using REST API and receives this error message. Which method can be used before the application profile can be configured?
- A. POST to aaaLogin
- B. POST to aaaRefresh
- C. POST to aaaLogout
- D. GET to aaaListDomains
Answer: A
NEW QUESTION # 330
Refer to the exhibit. VLAN 10 Is experiencing delays and packet drops when the traffic is forwarded through the switch. The destination flow analyzer accepts traffic captures of not more than 30 seconds. Which configuration implements the traffic capture that meets the requirements?
- A. Option A
- B. Option D
- C. Option C
- D. Option B
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/system_management/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_System_Management_Configuration_Guide_7x/b_Cisco_Nexus_9000_Series_NX-OS_System_Management_Configuration_Guide_7x_chapter_011100.html
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/4_2/nx-os/system_management/configuration/guide/sm_nx_os_cli/sm_15netflow.html
NEW QUESTION # 331
A network engineer must SPAN only the ingress traffic of a Cisco MDS 9000 series switch from interface fc
1/23 to interface fc 1/24. Which two configuration must be applied to complete this task? (Choose two)
- A. Option D
- B. Option C
- C. Option A
- D. Option B
Answer: B,C
NEW QUESTION # 332
A network engineer plans to upgrade the firmware of a Cisco UCS B-Series chassis by using the Auto Install feature. Which component is upgraded during the infrastructure firmware upgrade stage?
- A. Cisco IMC
- B. Adapter
- C. I/O module
- D. BIOS
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User- Guides/Firmware-Mgmt/4-0/b_UCSM_GUI_Firmware_Management_Guide_4-
0/b_UCSM_GUI_Firmware_Management_Guide_4-0_chapter_0100.html
NEW QUESTION # 333
What is a benefit of using the Cisco UCS Lightweight upgrade feature?
- A. All servers are rebooted to push the latest updates.
- B. The firmware version of a component is updated only when it has been modified.
- C. Security updates are scheduled with the next reboot of the fabric interconnects.
- D. A soft reboot is available for the fabric interconnects.
Answer: B
Explanation:
The Cisco UCS Lightweight Upgrade feature offers the benefit of updating the firmware version of a component only if there has been a modification. This means that not all components will be updated in every service pack, which can reduce downtime and the potential for disruptions caused by unnecessary updates1.
References := For more information on the Lightweight Upgrade feature, you can refer to the Cisco UCS Central Administration Guide, Release 2.0
NEW QUESTION # 334
Refer to the exhibit.
The STP priority of N7K-1 and N7K-2 are the lowest in the network. Which statement describes STP on the vPC?
- A. N7K-1 preempts N7K-2 as the STP root.
- B. N7K-1 appears as the STP root.
- C. N7K-1 and N7K-2 appear as a single STP root.
- D. N7K-2 appears as the STP root.
Answer: C
NEW QUESTION # 335
What are two recommended design choices in a topology for multipathing iSCSI traffic? (Choose two.)
- A. dual initiators to dual targets
- B. dual initiators to a single target with bonded interfaces
- C. single initiator to dual targets
- D. two NICs bonded together on the initiator
- E. initiators and targets in separate subnets
Answer: B,E
NEW QUESTION # 336
A network engineer must create a script to quickly verify IP reachability for multiple hosts using ping from the Cisco NX-OS switches. The script should use the management VRF and exit the shell after execution Which script should be used to achieve this objective?
- A. Option D
- B. Option A
- C. Option C
- D. Option B
Answer: A
NEW QUESTION # 337
An engineer is implementing security on the Cisco MDS 9000 switch.
Drag and drop the descriptions from the left onto the correct security features on the right.
Answer:
Explanation:
NEW QUESTION # 338
......
350-601 Exam Dumps - 100% Marks In 350-601 Exam: https://testking.testpassed.com/350-601-pass-rate.html